|
|
|
|
|
- fan diameter (all sizes): 24" (61 cm)
- height is 40-1/2" (102.9 cm) (less blower head); 84" (213.4 cm) overall
- width is 50" or 60" (127 cm or 152.4 cm); length is 39" (99 cm)
- shipping weight is 374 kg (825 lbs) (50" or 127 cm), 392 kg (865 lbs) (60" or 152.4 cm)
|
|
- Two-stage, double auger, PTO-driven snow blower; 540 RPM
- Body is 1/8" (0.32 cm) CRS plate, formed and welded steel
- Frame and harness is 3" x 3" x 1/4" (7.62 x 7.62 x 0.64 cm) tube with 1/2" x 2" (1.3 x 5 cm) supports
- Fan is 1/4" (0.64 cm) formed and welded steel
- Two equal-sized augers, reinforced open flyting
- #60 heavy duty drive chain, adjustable at idler
- 1/2" x 4" x 50" (1.3 x 10.16 x 127 cm) cutting edge, center punched, reversible
|
|
- Single pin release system
- Base is circular facet bent design with dual stage deflector hood
- Tapered for cleaner discharge
|
|
- 236 degree chute rotation
- Chute deflector operation has double-acting cylinder, 65 degrees up and 55 degrees down from horizontal
- 3/8" (0.95 cm) rubber hydraulic hoses rated at 16,000 psi, minimum burst pressure
- Hoses are connected to tractor with quick couplers
|
|
- AISI 315 steel input shaft with standard 1-3/8" (3.49 cm) six-spline input
- Output shaft has internal diameter of 2" (5 cm); supported by tapered roller bearings
- 28 oz. (0.8 liters) oil capacity of SAE 90EP gear oil
- Two shear pins, to protect yoke and U-joints, drive mechanisms and augers
|
